V18 Core Turning & Mill/Turn
V18 Core Milling
V18 Core Modeling
V18 Usability and Productivity
Other V18 Resources
SmartCAM V18 System Requirements
System requirements for SmartCAM V18 have not changed from SmartCAM V17.
SmartCAM users updating from SmartCAM V13 or earlier applications should compare their current systems to the V18 system requirements and make any necessary changes prior to installation.
Microsoft Windows Vista Business\Windows 7 Professional & Hardware Requirements
Other Operating Systems
Hard Disk Space
Note: Problems have been reported running SmartCAM using some motherboard embedded video chipsets. A separate video adapter is recommended.
The network card does not need to be attached to a network, but it must be enabled and active. Please read the SmartCAM Technical Bulletin #208 found at: http://www.SmartCAMcnc.com/Technical_Support/Tech_Bulletins/techbulletin.php?tbnum=208
Note: Problems have been reported running SmartCAM using some motherboard embedded Ethernet chipsets. Motherboard embedded Ethernet chipsets are not recommended. A separate Ethernet adapter is recommended.
Note: Optional digitizers must be configured as a mouse.
Copyright © 2018 SmartCAMcnc. All Rights Reserved