//    ----------------------------------------
//    
//    The following SmartCAM code generator has been 
//    created to generate NC code for the respective 
//    machine and control combinations listed below. 
//    
//    Due to differences in programming styles, 
//    controller versions, and optional equipment, 
//    SmartCAMcnc DOES NOT and CANNOT guarantee
//    that the NC code generated is correct for any 
//    specific machine. Some modification to the code 
//    generator to match your setup and output 
//    requirements is likely necessary. 
//    
//    Modifications to code generators do not TYPICALLY
//    require a significant amount of time. SmartCAM 
//    customers with active SMA contracts are entitled 
//    to support for their code generators from the 
//    SmartCAMcnc Support Group. To contact them for 
//    support, please send an email to: 
//    Support@SmartCAMcnc.com. If you would like 
//    information on purchasing SMA for your SmartCAM 
//    products, please contact: Sales@SmartCAMcnc.com
//    
//    DISCLAIMER: It is the responsibility of the end 
//    user to confirm and verify that the NC code 
//    created by any code generator is accurate and 
//    will not cause a machine malfunction which 
//    could result in stock, tooling, machine, and/or 
//    personal injury. 
//    
//    SmartCAMcnc assumes no responsibility or 
//    liability for any damage caused or alleged to 
//    have been caused by the use of any of the code 
//    generators it provides.
//    ----------------------------------------

// -----------------------------------------------------------
//
//             !! P L E A S E   R E A D   T H I S !!  
// 
//    This is a sample code generator built to 
//    generate code for the Machine/Control combination     
//    named below.  Due to differences in programming      
//    style, controller versions, and optional equipment   
//    McKenzie River Software can not guarantee that the
//    code generated is correct for your machine.               
//                                                         
//    It is YOUR responsibility to verify that the code    
//    created by this Code Generator will not cause a      
//    machine malfunction which could result in scrap      
//    and/or personal injury.                              
//                                                         
//    McKenzie River Software assumes no responsibility
//    or liability for any damage caused or alleged to be
//    caused by the use of this Code Generator.            
//
// -----------------------------------------------------------

// A generic Yasnak (MX2) Code Generator template file that SHOULD work with most vertical,
// 3 axis CNC milling machines with this control. This template has
// no provisions for 4th or 5th axis support.


@DECLARE
//#OUTCND //outputs conditional status
//#OUTSEC //outputs @section names
//#OUTREF //outputs processing errors
//#OUTRPT //outputs an error report file
@

@START
 %
 O#FILE
#EVAL(#U9=#TOOL*100)
 ( **** TOOL ##TOOL: #TDESC **** )
 N#U9 G00 G49 G53 Y0 Z0 T#TOOL
 M06
#NEXTPT
 G43 X#XPOS Y#YPOS Z#ZPOS S#SPEED #SPNDL H#LOFF T#NTOOL
@

@TOOLCHG
< #FXD> M09
 G00 G49 G53 Y0 Z0 M29
#EVAL(#U9=#TOOL*100)
 ( **** TOOL ##TOOL: #TDESC **** )
 N#U9 G00 G49 G53 Y0 Z0 T#TOOL
 M06
#NEXTPT
 G43 X#XPOS Y#YPOS Z#ZPOS S#SPEED #SPNDL H#LOFF T#NTOOL
@

@END
< #FXD> M09
 G00 G49 G53 Y0 Z0
 M06
 M98 P0001
 M30
 %
@

@SUBDEF
 %
 O#SNAME
#EVAL(#ABSI=1)
 #ABSI
@ENDDEF
#EVAL(#ABSI=0)
< #ABSI>
 M99
 %
@

@GOSUB
 M98 P#SNAME L#SREPT
@

@STPROF
< #ABSI>< #FXD>< #MOV>< X#XPOS>< Y#YPOS>< Z#ZPOS>
@

@ENDPROF
< #ABSI><< #MOV> Z#ZPOS>
< #DCOMP>
@

@RAP
< #ABSI>< #FXD>< #MOV>< X#XPOS>< Y#YPOS>< Z#ZPOS>
@

@LINE
< #ABSI>< #DCOMP#EXC D#DOFF>< #PLANE>< #MOV>< X#XPOS>< Y#YPOS>< Z#ZPOS>< F#FEED>
@

@ARC
< #ABSI>< #PLANE>< #MOV>< X#XPOS>< Y#YPOS> I#XCTR J#YCTR< F#FEED>
@

@XZARC
< #ABSI>< #PLANE>< #MOV>< X#XPOS>< Z#ZPOS> I#XCTR K#ZCTR< F#FEED>
@

@YZARC
< #ABSI>< #PLANE>< #MOV>< Y#YPOS>< Z#ZPOS> J#YCTR K#ZCTR< F#FEED>
@

@HELIX
#EVAL(#ABSI=1)
#EVAL(#U8=#ZPOS-#ZST)
#EVAL(#U9=#U8/#INC)
< #PLANE>< #ABSI>< #MOV>< X#XPOS>< Y#YPOS> Z#INC I#XCTR J#YCTR#EXLN
 L#U9< F#FEED>
#EVAL(#ABSI=0)
#UPDATE(#ZPOS)
@

@XZHELIX
< #PLANE>< #ABSI> #MOV< X#XPOS> Y#YPOS< Z#ZPOS> I#XCTR K#ZCTR< F#FEED>
@

@YZHELIX
< #PLANE>< #ABSI> #MOV X#XPOS< Y#YPOS>< Z#ZPOS> J#YCTR K#ZCTR< F#FEED>
@

@ZCLRMV
< #ABSI>< #FXD><< #MOV> Z#ZPOS>
@

@ZCHKMV
< #ABSI>< #FXD><< #MOV> Z#ZPOS>
@

@ZDPTHMV
< #ABSI><< #MOV> Z#ZPOS< F#FEED>>
@

@FXD1
< #ABSI>< #FXD>< X#XPOS>< Y#YPOS>< Z#ZDPTH R#ZCHK>< F#FEED>
@

@FXD2
< #ABSI>< #FXD>< X#XPOS>< Y#YPOS>< Z#ZDPTH R#ZCHK P#DWELL>< F#FEED>
@

@FXD3
< #ABSI>< #FXD>< X#XPOS>< Y#YPOS>< Z#ZDPTH R#ZCHK>< F#FEED>
@

@FXD4
< #ABSI>< #FXD>< X#XPOS>< Y#YPOS>< Z#ZDPTH R#ZCHK>< F#FEED>
@FXD5
#EVAL(#PECK=2.5*#TLDIA)
#EVAL(#V9=#TLDIA)
#EVAL(#V8=.5*#TLDIA)
< #ABSI>< #FXD>< X#XPOS>< Y#YPOS>< Z#ZDPTH R#ZCHK I#PECK J#V8 K#V9>< F#FEED>
@

@DWELL
 G04 P#DWELL#EVAL(#TIME=#DWELL/60)
@