SmartCAM V16
Turning and Milling on SolidsVerification and SimulationUsability and ProductivityData Translation and OtherOther ResourcesContact SmartCAMcnc |
SmartCAM V16 System RequirementsSystem requirements for SmartCAM V16 have not changed from SmartCAM V15. SmartCAM users updating from SmartCAM V13 or earlier applications should compare their current systems to the V16 system requirements and make any necessary changes prior to installation. Operating System
Microsoft Windows Vista Business\Windows 7 Professional & Hardware Requirements Other Operating Systems Remote Access Processor (CPU) Physical RAM Hard Disk Space Video Card Note: Problems have been reported running SmartCAM using some motherboard embedded video chipsets. A separate video adapter is recommended. Network Card The network card does not need to be attached to a network, but it must be enabled and active. Please read the SmartCAM Technical Bulletin #208 found at: https://www.SmartCAMcnc.com/Technical_Support/Tech_Bulltins/techbulletin.php?tbnum=208 Note: Problems have been reported running SmartCAM using some motherboard embedded Ethernet chipsets. Motherboard embedded Ethernet chipsets are not recommended. A separate Ethernet adapter is recommended. Devices Note: Optional digitizers must be configured as a mouse.
|
Copyright © 2024 SmartCAMcnc. All Rights Reserved